Skip to main content
GNS Technology logo

Solutions

Connect the industrial site, and keep it connected

From backup connectivity for a single retail shop to central management of multiple remote sites, we combine Teltonika Networks products with network design, configuration and managed care to deliver something that keeps working.

  • Wired, 4G/5G and dual-SIM failover
  • Industrial switching, PoE and fibre
  • VPN, VLANs and firewall rules
  • RMS management across sites
  • Local configuration, installation and support

Capabilities

Six common integration areas

Combined to suit the site; you do not need all of them at once.

Industrial routers and backup connectivity

RUT routers as primary or backup links, with wired, 4G/5G and dual-SIM switching for POS, CCTV and unattended equipment.

5G fixed wireless access

RUTM 5G routers in place of, or alongside, fixed broadband for sites without fibre, temporary locations or fast rollouts.

Industrial switches and PoE

TSW industrial switches with DIN-rail mounting, PoE output and fibre uplinks for PLCs, cameras, access points and edge devices.

VPN and remote management

Site-to-site or remote-access VPN, with RMS for device status, firmware and connectivity.

IoT gateways and sensors

TRB gateways connect sensors, meters and field equipment, with interfaces and communications chosen to suit the site.

Network segmentation and security

VLANs, firewall rules and guest networks separate office, control, POS and guest traffic to reduce lateral movement.

Use cases

Real-world customer cases

These cases come from the Teltonika Networks official site and show how different industries use its industrial networking products.

Workplace safety board powered by the RUT200 4G router

Workplace safety board (RUT200)

Ampron deployed a self-contained workplace safety board using the Teltonika RUT200 LTE router, eliminating physical data cabling for a rapid wireless deployment.

AMZ Racing using a Teltonika 5G router for RTK navigation

5G RTK navigation (AMZ Racing)

AMZ Racing uses a Teltonika 5G router to transfer precise RTK correction data for high-precision positioning in an autonomous vehicle.

ATRM50 5G router connecting a train

5G on the rails (ATRM50)

The ATRM50 5G router provides fast, secure and certified train connectivity, ready for expanding transport IoT needs.

Topology of field devices, industrial switch, router, RMS and cloud

Network design

From the site to the cloud

Field devices connect through an industrial switch to the router, then over VPN and RMS to the cloud or your management platform. The design covers line failover, VLAN separation, power and the installation environment, rather than simply chaining devices together.

Delivery process

Six steps from assessment to managed care

Each step has a defined output, so the scope does not drift.

  1. Requirements workshop

    Confirm the systems, users, traffic and downtime tolerance.

  2. Site assessment

    Review power, cabinets, cabling, signal coverage and the installation environment.

  3. Design and selection

    Provide model recommendations, network topology, IP plan and quotation.

  4. Configuration and testing

    Complete routing, VPN, VLAN, firewall and failover testing.

  5. Installation and handover

    Install around the site, then hand over labels, configuration backup and operating notes.

  6. Ongoing support

    Optional GNS CARE managed services cover monitoring, updates and technical support.

How quoting works

Hardware is quoted per model and quantity; design, configuration, installation and managed services are quoted by project scope. Send site photos, the existing equipment list and the systems to connect, and we will reply with recommended models and the next step.

FAQ

Solution questions

Can our existing network equipment be reused?

Yes. We first confirm its interfaces, features and warranty state, then decide whether to keep, add to or replace it.

How does dual-SIM failover work?

The router monitors the primary connection and switches to the other SIM or wired link when it fails; the switchover time and exact behaviour depend on the model and configuration.

Can a 5G router replace fixed broadband entirely?

It depends on the 5G coverage, usage and stability the site needs. We assess signal and traffic first, and may recommend 5G as backup rather than the primary link.

Can you configure equipment without supplying it?

Yes, after confirming compatibility and remote-access arrangements. If the equipment is end-of-life or lacks the required features, we will say so first.

Can multiple sites be managed centrally?

Yes. RMS and VPN provide a central view of device status, firmware and connectivity, with permissions assigned per team.

Tell us about the site

Send site photos, the existing equipment and the systems to connect. We will reply with a proposed architecture, models and quoting arrangements.

Chat on WhatsAppEmail us