Skip to main content
GNS Technology logo

Cable-free workplace safety boards with the RUT200

GNS Engineering Team 2 min read

Factories, warehouses and construction sites often display incident-free days in high-traffic areas, yet those are exactly the places where retrofitting Ethernet is difficult or expensive. Ampron’s official case study uses the Teltonika RUT200 to make the safety board a self-contained system that does not depend on factory IT infrastructure.

Workplace safety board powered by a RUT200 4G router

The challenge

The board must be visible in production halls or at entrances. Running new cabling to those positions can be costly or impractical, and supervisors also need a quick floor-level reset without opening an application or browser.

The deployed architecture

  • Ampron’s LED controller connects to the RUT200 over LAN and runs its own web server and tracking logic.
  • The RUT200 operates in Wi-Fi Access Point mode, letting authorised staff use a phone, tablet or laptop to reach the controller interface.
  • A physical reset button connects to the RUT200 digital input. RutOS Event Juggler detects the press and sends an HTTP GET request to the controller over LAN, without an external microcontroller or custom firmware.
  • Built-in debounce protection prevents one press from being registered repeatedly.

Why the design fits industrial sites

The design combines wireless local management and physical I/O in one industrial router. The board does not need to join the factory network or wait for long cable runs, while the RUT200 is intended for environments where consumer hardware may struggle with temperature and vibration.

Hong Kong deployment notes

A local project can follow the same pattern, but should confirm the LED controller, supply voltage, button distance, Wi-Fi coverage and whether 2.4 GHz operation is permitted. If the data also needs to reach a central platform, add VPN, MQTT or RMS rather than exposing the controller directly to the internet.

Related product and solution

Official source

Teltonika Networks — Workplace safety board powered by RUT200 4G router

This article summarises the official case. Final configuration and certification scope depend on the project design, product revision and current official documentation.

Chat on WhatsAppEmail us